Mini-pleat HEPA FIlters

* The filter can be assembled with / without flanges Available in casing thickness from 1 to 1.5 mm in variants of Mild steel/Galvanized steel/Aluminium/Stainless steel
* Powder coating is the standard surface finishing offered Mini-pleat HEPA FIlters
* Filtration media is all glass, micro fibre, fire retardant HEPA filtration media
* Aluminium separators made from 0.04 mm thick aluminium foil in the case of deep pleat version.
* High impact poly styrene separators in the case of mini pleat version
* Synthetic soft rubber gasket with dovetail joints.
* Epoxy & Silicon Sealants
* Initial pressure drop of 18 mm WC for deep pleat filters and 14 mm WC for mini pleat filters
* Suitability to class 100 clean rooms and work stations as per FED:STD:209E
* Efficiency 99.98% down to 0.3 microns. Suitable for H13 class as per EN779
* All filters are particle counted and DOP leak tested
* Filter construction as per recommendations of IES-RP-001
* Each filter is accompanied by a test certificate

APPLICATIONS
* Clean rooms for micro component electronic manufacture & assembly
* Pharmaceutical Processing
* Aerospace Engineering
* Genetic & Biological research
* Biohazard Atmosphere
* Laminar Flow Workstations
* Bio Safe Hoods(Biological Safety Cabinets)
* Hospital Operating Theaters & Intensive care units
* Atomic Research
* Pre filter stage to ULPA systems

Technical Specification

---

	*		Frame :		Aluminium / Galvanized steel / SS 304
	*		Type		Flange / Box Type
	*		Class:		H-13/ H14
	*		Particulate Efficiency :		99.97 % - 99.99 % Down to 0.3 Micron
	*		Gas Kit :		Food Grade
	*		Temperature :		Ambient
	*		Sealent :		Polyurethane
	*		Media :		Submicronic Glass fiber paper Imported
	*		Standard Size		* 610mm x 610mm x 69 915mm x 610mm x 69 610mm x 305mm x 69 1220mm x 610mm x 69 915mm x 915mm x 69